ISO 50

Home / ISO 50

ISO 50 Spraying and Injection Machine

The ISO 50 spraying and injection machine is intended for the spraying and injection (insufflation) of glass fibers, rock fibers, cellulose, ceramic fibers and pulverizable products having low density, such as vermiculite etc.

Built and machined of welded steel, it is mounted on wheels for easy movement.

Spraying and Injection (insufflation) Machine ISO 50
Usage: Professional contractor
Electric Power Supply: 400v, 3 phases, 20A, 50 Hz
Remote Control: 3 functions, stop – air + wool
Feeding: Automatic by means of Archimedean screw

Downloads / Maintenance

Product Video

Additional Information

Dimensions (m): L=1,50 l=0,67 H=1,55
Weight: 385 kgs
Air propulsion: Turbine SX5
Air pressure (mbar): 100 – 700 millibars
Motor power (kW)
– Variable speed motor: 1.1 : 1.1
– Blower (turbine) motor: 5.5
– Carding motor : 1.5
Drive with speed variation: Planetary variator with a range of adjustment of 8 : 1 The change is carried out either when at a standstill, or in operation
Hose diameter: Ø 60 mm
Remote control 3 functions : stop – air – air + wool
Feeding: Automatic by means of Archimedean screw
Carding engine: Rotating with variable and controllable steps
Electric power supply: 400 V, 3 phases, 20A, 50 Hz
Flow rate: Depending of the product used, operation of the mechanical variable speed drive unit allows spraying rates of 0.8 Kg/mn to 15 Kg/mn

All kinds of applications are allowed thanks to ISOLFRANCE machinery:

  • Blowing on attics floors, roofspace (loft insulation)
  • Insufflation in chimneys (flues), ventilation ducts, wall injection, under the floor insulation, metal framework insufflation, roof inclines insufflation, and ships and refineries insulation (insufflation within casings)
  • Wet-spraying insulation of ventilation ducts, ceilings, walls and underside floor
  •  Suction of blown insulation in the attics, deflocking, old blown or wet-sprayed insulation _ And even filling of decorative elements (cuddly toys)