The ISO MINI S GM 2 machine is intented for the blowing, spraying and injection (insufflation) of fiberglasses, rock wool, cellulose, ceramic wool, and low density pulverizable products.
THE MINI S GM 2: A compact machine for a maximum of applications (wet spraying – injection (insufflation) – blowing insulation)
MINI S GM 2= The “All In One” (exceptional and polyvalent)
It is built in sheet steel mechanic welded, and it has wheels to facilitate its movement on construction sites.
This low electric consumption machine can be connected on any 230V plug (16A).
All-in-one : (Blowing – Injection (insufflation) – Spraying)
Weight : 146 kg
Motors : 4 kW – 230V – monophasé 16A
Downloads / Maintenance
Product Video
Additional Information
Weight: 140 kg
Air pressure (mbar):
150 – 300 millibars, 150 – 400 m3/h
Motor power (kW) : 4 kW – 230V – mono 16A
Drive with speed variator :
Planetary variator with a range of adjustment of 8 : 1
Hose diameter : 60 mm
Hose max length : 80 m
Elevation change max : 50 m
Remote control (wired or radio) :
3 functions (stop – air – air + wool)
Feeding : Automatic
Electric power supply : 230v, single-phase 16A
Spraying flow rate – glass wool Thermal insulation :
7 kgs/mn – 350 mm in 1 layer
Spraying flow rate – rock wool Thermal insulation :
12 kgs/mn – 240 mm in 1 layer
Injection flow rate :
0 – 360 kgs/h by mechanical variator
Blowing flow rate – cellulose : 570 kgs/h
Blowing flow rate – rock wool : 350 kgs/h
Blowing flow rate – fiberglass : 300 kgs/h
We are available to help you with any information you might require: contact@isolfrance.net